Laser Technology

Our CO2 Laser Systems are based on sealed glass laser tubes or on demand also on RF excited metal tubes. We offer a wide range of output power from 40 W up to 400 Watt. Applications are typical nonmetal Material like Acrylicglas, Wood, Fabric, Leather and much more. We can supply optimised system for special application with special focusing heads and other special Accessories.

Card image cap
CO2 Laser Cutting and Engraving

Details
Card image cap
Fiber Laser Cutting Systems

Details
Card image cap
Marking Lasers CO2 and Fiber

Details
Card image cap
Hall Marking Lasers

Details
Card image cap
Micro Mach Lasers

Details

CO2 Laser Cutting and Engraving

BATEC 9060/1390/1610

Product by Batec


Our CO2 Laser Systems are based on sealed glass laser tubes or on demand also on RF excited metal tubes. We offer a wide range of output power from 40 W up to 400 Watt. Applications are typical nonmetal Material like Acrylicglas, Wood, Fabric, Leather and much more. We can supply optimised system for special application with special focusing heads and other special Accessories.

Blade working table
Beijing Reci laser tube W1 80W
Ruida control system
Stepper motor and driver 
Water chiller for laser tube cooling 
Hiwin square guide rails 
Exhaust fan 
Air pump
Cutting Speed 0-40000mm/min
Engraving Speed 0-60000mm/min
Resetting positioning accuracy ≤±0.01mm
Resolution ratio ≤0.0125
Laser output 1-100% software setting
Min. shaping character English 1.0mm x 1.0mm
Warranty Two years
BATEC-9060 Laser Power - 90/100 W;
Cutting Area - 900 * 600 mm
BATEC-1390 Laser Power - 90/100/150 W;
Cutting Area - 900 * 1300 mm
BATEC-1610 Laser Power - 90/100/150 W;
Cutting Area - 1600 * 1000 mm

Bed type laser CO2 engraving and cutting machine

BATEC 1318/1325/1530

Product by Batec


Our CO2 Laser Systems are based on sealed glass laser tubes or on demand also on RF excited metal tubes. We offer a wide range of output power from 40 W up to 400 Watt. Applications are typical nonmetal Material like Acrylicglas, Wood, Fabric, Leather and much more. We can supply optimised system for special application with special focusing heads and other special Accessories.

Blade working table
Beijing Reci laser tube W1 80W
Ruida control system
Stepper motor and driver 
Water chiller for laser tube cooling 
Hiwin square guide rails 
Exhaust fan 
Air pump
Cutting Speed 0-40000mm/min
Engraving Speed 0-60000mm/min
Resetting positioning accuracy ≤±0.01mm
Resolution ratio ≤0.0125
Laser output 1-100%softwaresetting
Min. shaping character English 1.0mm x 1.0mm
Warranty Two years
BATEC-1318 Laser Power CO2 - 90/100/150 W;
Cutting Area - 900 * 600 mm
BATEC-1325 Laser Power - 90/100/150 W;
Cutting Area - 900 * 600 mm
BATEC-1530 Laser Power - 90/100/150 W;
Cutting Area - 900 * 600 mm

Auto Feeding Fabric Laser Cutting Machine

BATEC 1610/1810/1630

Product by Batec


Our Autofeeding CO2 laser systems mainly done for the garment and textile industry, where you have the material on endless roles. This material roles are hold on backside of the laser system and will be automatic transported to the processing area. With this help you can automatisize your process and increase the efficiency of your production. All kind of fabric but also paper on roles can be handled.

Blade working table
Beijing Reci laser tube W1 80W
Ruida control system
Stepper motor and driver 
Water chiller for laser tube cooling 
Hiwin square guide rails 
Exhaust fan 
Air pump
Cutting Speed 0-40000mm/min
Engraving Speed 0-60000mm/min
Resetting positioning accuracy ≤±0.01mm
Resolution ratio ≤0.0125
Laser output 1-100%softwaresetting
Min. shaping character English 1.0mm x 1.0mm
Warranty Two years
BATEC-1610 Laser Power CO2 - 90/100 W;
Cutting Area - 900 * 600 mm
BATEC-1810 Laser Power - 90/100/150 W;
Cutting Area - 900 * 1300 mm
BATEC-1630 Laser Power - 90/100/150 W;
Cutting Area - 1600 * 1000 mm

Hybrid Laser Cutting machine for metal and non metal applications

BA HP 1390/1325

Product by Batec


Our CO2 Laser Systems are based on sealed glass laser tubes or on demand also on RF excited metal tubes. We offer a wide range of output power from 40 W up to 400 Watt. Applications are typical nonmetal Material like Acrylicglas, Wood, Fabric, Leather and much more. We can supply optimised system for special application with special focusing heads and other special Accessories.

Blade working table
CO2 laser tube 150W 
Ruida control system 
Stepper motor and driver
Water chiller for laser tube cooling
Belt and Hiwin square guide rails
Auto focus cutting head
Exhaust fan
Air pump
Cutting Speed 0-40000mm/min
Engraving Speed 0-60000mm/min
Resetting positioning accuracy ≤±0.01mm
Resolution ratio ≤0.0125
Laser output 1-100% software setting
Min. shaping character English 1.0mm x 1.0mm
Warranty 12 months
BATEC-1390 Laser Power CO2 - Reci 80W-90W;
Cutting Area - 1300 x 900mm
BATEC-1325 Laser Engraving and Cutting Machine Laser Power - 80W/100W/150W/180W;
Cutting Area - 1300mm*2500mm (51in*98in) (L*W)
BATEC-1325 Metal and No-metal Laser Cutting Machine Laser Power - 280W;
Cutting Area - 1300mm*2500mm

Fiber Laser Cutting Systems 1325/1325L/1325LC/ 1325LE

BATEC FIB 1325/1325L/1325LC/ 1325LE

Product by Batec


A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare earth elements. Advantage of Fiber Laser is the excellant beam quality so that a laser beam can be focused much better and so the power density is getting much higher compare to high power CO2 Lasers. An further advantage is the better efficiency and so a lower power consumption and the small size of the laser itself. A fiber laser is nearly service free due his much longer lifetime compared to CO2 Laser

1. Raycus 500w fiber laser generator
AU3TECH operation system
AU3TECH laser head
3rd generation aviation aluminum beam
France DELTA servo motor/France Schneider servo motor
Taiwan TBI ball screw transmission
Taiwan Airtac pneumatic parts
Taiwan square rail
Lubrication system
Smoke purify system
Tongfei water cooling chiller
2. Special fiber laser cutting head and automatic following system
The machine uses Jiaqiang fiber laser cutting head and touchless
automatic following system, which can automatically adjust the 
focal length to provide the best cutting effect and avoid scratching
the material due to the focal length change caused by the material
 block.
3. Transmission system:
Transmission system adopts German ATLANTA pinion and rack precision
transmission, Japanese servo motor
4. Control system:
The operating system can use editing software and secondary development
tools to customize special interfaces and functions so that customers can
create their own human-machine interface.
CuttLaser generator fiber laser
Wavelength 1064mn
Bed Welding
Working width 1300/2500
Positioning Accuracy 0.03mm
Repeatability 0.015mm
Maximum Acceleration 1.2G
Maximum Idle Speed 120m/min
Cutting Accuracy +0.02mm
Voltage 380V, 50Hz/60Hz, 60A
Dimension 5540*3920*1954mm
Weight 2000kg
Material to handle Steel, MS, Copper, Brass and more
BATEC FIB 1325L-500/750 Laser Power FIB - 500/750 W;
Cutting Area 1300 * 2500 mm
BATEC FIB 1325LC-500/750 Laser Power FIB - 500/750 W;
Cutting Area 1300 * 2500 mm
BATEC FIB 1325LE-500/750/1000/1500/2000 Laser Power FIB - 500/750/1000/1500/2000 W

BATEC FIB 3015LE TP Series for plate and tube cutting combined

BATEC FIB 3015LE TP Series

Product by Batec


A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare earth elements. Advantage of Fiber Laser is the excellant beam quality so that a laser beam can be focused much better and so the power density is getting much higher compare to high power CO2 Lasers. An further advantage is the better efficiency and so a lower power consumption and the small size of the laser itself. A fiber laser is nearly service free due his much longer lifetime compared to CO2 Laser

Switzerland
Raytools laser head
6m full automatically chuck
cutting diameter 20mm-220mm
Japan YASKAWA servo motor
German ATALANTA gear rack
Japan SMC/Taiwan Airtac pneumatic parts
French Schneider electronic parts
Automatic lubrication system
Integrated cast aluminum beam
Taiwan HIWIN square rail
Laser head automatically adjust system.
Cypcut operation system
Smoke purify system
Water cooling machine
One year warranty warranty
Cutting Speed Acc. Cutting Speed table
Engraving Speed na
Material to handle Steel, MS, Copper, Brass and more
BATEC FIB 3015LE TP E-1000 Laser Power FIB - 1000 W;
Cutting Area 1500 * 3000 mm
BATEC FIB 3015LE TP-1000 Laser Power FIB - 1000 W;
Cutting Area 1500 * 3000 mm
BATEC FIB 3015LE TP-1500 Laser Power FIB - 1500 W;
Cutting Area 1500 * 3000 mm

Fiber Laser Cutting Systems 3015LE/3015E/3015LN

BATEC FIB 3015LE/3015E/3015LN

Product by Batec


A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare earth elements. Advantage of Fiber Laser is the excellant beam quality so that a laser beam can be focused much better and so the power density is getting much higher compare to high power CO2 Lasers. An further advantage is the better efficiency and so a lower power consumption and the small size of the laser itself. A fiber laser is nearly service free due his much longer lifetime compared to CO2 Laser

Raycus or IPG laser source
AU3TECH operation system
AU3TECH laser head
Taiwan APEX rack pinion
Taiwan HIWIN square rail
Laser head automatically adjust system.
Smoke purify system
Water cooling machine
Taiwan DELTA servo motor and driver
Cutting Speed Acc. Cutting Speed table
Engraving Speed na
Material to handle Steel, MS, Copper, Brass and more
BATEC FIB 3015LE-500/750/1000/1500/2000/3000/4000 Laser Power FIB - 500/750/1000/1500/2000/3000/4000 W;
Cutting Area 3000 * 1500 mm
BATEC FIB 3015E-500/750/1000 Laser Power FIB - 500/750/1000 W;
Cutting Area 3000 * 1500 mm
BATEC FIB 3015LN-500/750/1000/1500 Laser Power FIB - 500/750/1000/1500 W;
Cutting Area 3000 * 1500 mm

Fiber Laser Cutting Systems 3015CN

BATEC FIB 3015CN

Product by Batec


A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare earth elements. Advantage of Fiber Laser is the excellant beam quality so that a laser beam can be focused much better and so the power density is getting much higher compare to high power CO2 Lasers. An further advantage is the better efficiency and so a lower power consumption and the small size of the laser itself. A fiber laser is nearly service free due his much longer lifetime compared to CO2 Laser

Switzerland Raytools laser head
France Motovario motor reducer
Japan YASKAWA servo motor 850w
Taiwan APEX gear rack
Japan SMC/Airtac pneumatic parts
French Schneider electronic parts
Automatic lubrication system.
Integrated cast aluminum beam
Taiwan HIWIN square rail
Laser head automatically adjust system.
Cypcut operation system
Smoke purify system
Water cooling machine
One year warranty
Cutting Speed Acc. Cutting Speed table
Engraving Speed na
Material to handle Steel, MS, Copper, Brass and more
BATEC FIB 3015E-500/750/1000 Laser Power FIB - 500/750/1000 W;
Cutting Area 3000 * 1500 mm
BATEC FIB 3015LN-500/750/1000/1500 Laser Power FIB - 500/750/1000/1500 W;
Cutting Area 3000 * 1500 mm

Fiber Laser Tube Cutting machine FIB 60M-500/750/1000

BATEC FIB 60M-500/750/1000

Product by Batec


A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare earth elements. Advantage of Fiber Laser is the excellant beam quality so that a laser beam can be focused much better and so the power density is getting much higher compare to high power CO2 Lasers. An further advantage is the better efficiency and so a lower power consumption and the small size of the laser itself. A fiber laser is nearly service free due his much longer lifetime compared to CO2 Laser

Switzerland
Raytools laser head
6m full automatically chuck
cutting diameter 20mm-220mm
Japan YASKAWA servo motor
German ATALANTA gear rack
Japan SMC/Taiwan Airtac pneumatic parts
French Schneider electronic parts
Automatic lubrication system
Integrated cast aluminum beam
Taiwan HIWIN square rail
Laser head automatically adjust system.
Cypcut operation system
Smoke purify system
Water cooling machine
One year warranty warranty
Cutting Speed Acc. Cutting Speed table
Engraving Speed na
Material to handle Steel, MS, Copper, Brass and more
BATEC FIB 60M-500/750/1000 Laser Power FIB - 500/750/1000 W;
Cutting Area 1500 * 3000 mm

Fiber Laser Cutting Systems

BATEC FIB 0640/1390

Product by Batec


A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare earth elements. Advantage of Fiber Laser is the excellant beam quality so that a laser beam can be focused much better and so the power density is getting much higher compare to high power CO2 Lasers. An further advantage is the better efficiency and so a lower power consumption and the small size of the laser itself. A fiber laser is nearly service free due his much longer lifetime compared to CO2 Laser

Switzerland Raytools laser head
Japan Panasonic servo motor
Taiwan TBI ball screw drive
Japan SMC /Airtac pneumatic parts
French Schneider electronic parts
Laser head automatically adjust system
Cypcut operation system
Smoke exhaust system
Water cooling machine
One year warranty
Cutting Speed Acc. Cutting Speed table
Engraving Speed na
Material to handle Steel, MS, Copper, Brass and more
BATEC FIB 0640-500 Laser Power FIB - 500 W;
Cutting Area 600 * 400 mm
BATEC FIB 0640-750 Laser Power FIB - 750 W;
Cutting Area 600 * 400 mm
BATEC FIB 1390-500 Laser Power FIB - 500 W;
Cutting Area 1300 * 900 mm
BATEC FIB 1390-750 Laser Power FIB - 750 W;
Cutting Area 1300 * 900 mm

CO2 Laser Marking System CO2 10600 nm

BA CO2MARK CO2 Laser 10600 nm

Product by Batec


This Laser System is especially designed for fast marking and engraving of non metal materials. But also fast cutting is possible if the material is not too thick like wedding cards and more

Best cutting edges
Smallest cut slit to avoid losses of the material
Smallest possible Laser beam spot size to realize also
very fine cuts.
We offer this system with high quality RF laser from
China or with Synrad RF laser, number on in the world for
CO2 lasers.
Power 10W / 30W/ 50W/ 75W / 100W
Laser Wavelength 1060nm
Marking Area 110mm*110mm / 145mm*145mm
Optional Marking Area 50mm*50mm / 100mm*100mm / 200mm*200mm / 300mm*300mm / 300mm*400mm
Marking Depth ≤1mm
Marking Speed 7000mm/s
Controller(Software--EzCad) JCZ
Dimension (L*W*H) 650mm*210mm*550mm
Marking Laser CO2 Laser 10600 nm Laser Power FIB - 10W / 30W/ 50W/ 75W / 100W;
Cutting Area 110mm*110mm / 145mm*145mm

Fiber Laser Marking Systems

BA FIBS 10/20/30/50/100

Product by Batec


This Laser System is especially designed for Marking of any kind of metal like steel, brass and copper and much more.

Best marking results
Smallest letters can be easily done due the optics
Smallest possible Laser beam spot size to realize also
very fine cuts.
As option a special fume extractor to avoid dust in your
lab.
Power 10W / 20W/ 30W/ 50W/ 100 W
Laser Wavelength 1064nm
Marking Area 110mm*110mm / 145mm*145mm
Optional Marking Area 50mm*50mm / 100mm*100mm / 200mm*200mm / 300mm*300mm / 300mm*400mm
Marking Depth ≤1mm
Marking Speed 7000mm/s
Controller(Software--EzCad) JCZ
Dimension (L*W*H) 650mm*210mm*550mm
BA FIBS 10/20/30/50/100 Laser Power FIB - 10W / 20W/ 30W/50W/100 W;

Fiber Laser Cutting machine Gold and Silver

BATEC FIBM 10/20/50/100

Product by Batec


This Laser System is especially designed for Marking of any kind of metal like steel, brass and copper and much more.

Best marking results
Smallest letters can be easily done due the optics
Smallest possible Laser beam spot size to realize also
very fine cuts.
As option a special fume extractor to avoid dust in your
lab.
Power 10W / 20W/ 30W/ 50W/ 100 W
Laser Wavelength 1064nm
Marking Area 110mm*110mm / 145mm*145mm
Optional Marking Area 50mm*50mm / 100mm*100mm / 200mm*200mm / 300mm*300mm / 400mm*400mm
Marking Depth ≤1mm
Marking Speed 7000mm/s
Controller(Software--EzCad) JCZ
Dimension (L*W*H) 550mm*600mm*600mm
BATEC FIBM 10/20/50/100 Laser Power FIB - 10W/20W/30W/50W/100 W;

Hall Marking Laser

Hall Marking Laser

Product by Batec


This Laser System is especially designed and configured for Hall Marking. All parameters are optimised for this application

Best Marking results
Smallest possible Laser beam spot size to realize also very fine structures.
As option a special fume extractor to collect the vaporized gold and gold dust
Output power range from 10 to 100 Watt
Working area up to 250*250 mm
Output power range 10 to 100 Watt
Working area 250*250 mm
Hall Marking Laser Output power range - 10 to 100 Watt
Working area - 250*250 mm

Micro Mach Lasers

Micro Mach Lasers

Product by Batec


This ultra-fast laser machine has extremely short operating time, high peak power which can directly ionize the maaterials in the affected area and realize "Cold Processing" with high precision and low damage which can not be achieved by long pulse lasers. Hence this ultrafast laser is widely used for micro-machining applications. It also offers its customers superior solutions for high precision processing such as hole-drilling, etching and cutting of various materials.


Ultra-short pulsed laser is used as processing source, combined with the 
compound beam scanning system. It can realize the high precision of all kinds 
of metals, non-metals and composite materials.
Power 10W / 20W/ 30W/ 50W/ 100 W
Laser Wavelength 1064nm
Marking Area 110mm*110mm / 145mm*145mm
Optional Marking Area 50mm*50mm / 100mm*100mm / 200mm*200mm / 300mm*300mm / 400mm*400mm
Marking Depth ≤1mm
Marking Speed 7000mm/s
Controller(Software--EzCad) JCZ
Dimension (L*W*H) 550mm*600mm*600mm
3-Axis ultrafast laser machine Machine Tool Stroke(X/Y/Z Axis) (mm) - 600/400/200
Positioning accuracy(X/Y/Z Axis) (mm) - 0.005/0.005/0.008
Laser average power (w) - 10/20
5-Axis ultrafast laser machine Machine Tool Stroke(X/Y/Z Axis) (mm) - 1000/450/300
Positioning accuracy(X/Y/Z Axis) (mm) - 0.015/0.015/0.015
Laser average power (w) - 20/40/100