Instruments

We can offer different Lab Instruments for Labs in Pharma and other Quality Assurance Labs for all kind of Industries. This product range will be expanded soon.

Card image cap
Split Beam UV VIS Spectro photometer

Details
Card image cap
Particle Measurement Laser Diffraction

Details
Card image cap
XRF Analyzer

Details
Card image cap
Fume Extractor

Details

Split Beam UV VIS Spectrophotometer

L6S / L6 UV-Vis spectrophotometer

Product by Batec

L6S / L6 UV-Vis spectrophotometer uses advanced ratio of split-beam optical system, low-noise circuit design, with excellent reliability and stability. Can meet the daily analysis to the scientific research and so on a wide range of application needs.

8-inch color touch LCD display convenient operation.
High-performance monochromator with low-stray light and high-performance.
"Shiny holographic grating" with high-performance, high accuracy and reliability. 
Excellent cost performance.
Unique automatic adjustment "0" adjustment "100", automatic 8-hole sample rack.
Full-band scanning (limited to S), sub-band scanning (limited to S models), dynamic time scanning
Optional thermal plotter, can be data printing, spectral scanning (limited to S) fixed wavelength scanning, linear regression curve drawing.
USB interface, combined with UVwin8 UV spectrum software.
Advanced power protection measures.
Instrument uses high-energy imported long life flange positioning deuterium lamp. 
Metering mode the proportion of dual-beam
Monochromator Czerny - Turner
Focal length 160mm
Grating 1200 lines / mm
Detector photocell
Spectral bandwidth 2nm
Wavelength setting Touch screen input
Wavelength range 190 - 1100nm
Wavelength Accuracy ± 0.5nm
Wavelength repeatability ≤ 0.2nm
L6S / L6 UV-Vis Power supply voltage - AC220V ± 22V 50Hz ± 1Hz;
Light source - 12V20W halogen lamp and long life deuterium lamp mm
Rated power - 200W

Particle Measurement Laser Diffraction LT 2200/ 2200E / 3600

LT 2200/ 2200E / 3600 Particle Size Analyzer

Product by Batec

LT2200 & LT3600 are a new generation of intelligent laser particle size analyzer with high data acquisition rate based on many years of scientific research. It has Spatial filter and polarization combined with fibre technology

Spatial filter and polarization combined with fibre technology
Correction of anomalous change of airy disk (ACAD) in diffraction
Tilted cell windows with correction of total-reflection
Grilling large angle detector array
Optimization of inversion algorithm and self-adaptive technique
Continuing dispersant level sensing and control
Measurement principle Laser light scattering
Analysis Full Mie theory and Fraunhofer scattering
Size range 0.02μm -- 2200μm, No need for lens change and calibration
Light source Max. 20mW, 638nm Solid-state laser with thermostat integrated
Spatial filter OF Filter with polarization
Optical alignment system Smart rapid align system with full automation
Typical measurement time Less than 10s
Data acquisition rate 20kHz
Supply voltage 220VAC, 50/ 60Hz
Optical system dimensions 670mm x275mm x320mm
LT 2200 Particle Size Analyzer Light source - Max. 20mW, 638nm Solid-state laser with thermostat integrated
Size range - 0.02μm -- 2200μm, No need for lens change and calibration
LT 2200E Particle Size Analyzer Light source - Max. 20mW, 638nm Solid-state laser with thermostat integrated
Size range - 0.1μm -- 1200 μm , No need for lens change and calibration
LT 3600 Particle Size Analyzer Light source - Max. 20mW, 638nm Solid-state laser with thermostat integrated
Size range - 0.02μm -- 3600μm & 0.015μm -- 3600μm , No need for lens change and calibration

XRF Analyzer

XRF Analyzer

Product by Batec

TrueX hand-held alloy analyzer (XRF) is a powerful weapon in material identification (PMI) in production of high temperature and high pressure boiler, container, pipe, etc; metal identification in iron and steel metallurgy, nonferrous metals, aerospace, weapons, submarine vessels, etc; metal material identification in engineering installation and construction projects in areas of the petrochemical refining, fine chemical, pharmaceutical, power plant, aerospace, etc to ensure equipment and material acceptance meet the project specified requirements; scrap metal recycling industry.

Excellent Performance
One-touch operation
Nondestructive testing (NDT)
LANScientific analysis software
Scrap metal recycling and sorting
Quality Control, Quality Assurance (QC/QA) and Error-proofing( PKKA - YOKE)
Data Processing and Enterprise Resource
Planning (ERP)
Power supply system Intelligent battery management through MSBUS bus, real-time monitoring of the residual capacity of battery and backup battery.
Excitation source 50KV/200μA maximum pipe pressure pipe flow can be adjusted freely , Ag target (standard), Au, W, Rh target (optional).
Detector BOOST Si-PIN detector for TrueX 800. SDD detector for TrueX 860.
Range of detection All elements between Mg and U.
Display system Industrial resistive touch screen with screen size of 4.3".
Heat dissipation Equipped with a dedicated T-shaped radiator to dissipate the heat;no need to wait for cooling of detector time again.
Weight 1.6Kg ( with battery)
Dimensions 254 x 79 x 280 mm(L x W x H).
Handheld Alloy Analyzer
Handheld Precious Metal Analyzer
Handheld ROHS Analyzer
Handheld Mineral Analyzer

Fume Extractor

TBH Fume Extractor

Product by Batec

TBH provides energy-efficient, low-maintenance systems for every application – from a cost efficient small unit, to powerful central extraction solutions.

1) TBH MultiCover
2) Z-LinepanelPlus filter
3) Particle filter
4) Activated carbon/BAC filter
5) Motor module
Engine Brushless
Weight 40kg
Height 700mm
Width 350mm
Depth 350mm
Color/Casing 7035
TBH Fume Extractor